Jump to content


Photo

Juat a little bit thinner. CM World Series 2017 - ZenModz


  • Please log in to reply
4 replies to this topic

#1 ZenModz

ZenModz

    Apprentice

  • Quark
  • 113 posts

Posted 11 March 2017 - 04:32 PM

 l8Fzwdr.jpg





Hello Again :)  


I had not planed on doing a second build for the world series but I still have time for something small.  I have been thinking about doing a small form build for some time

and i've been wanting to do a white build as well, so for this build im looking at doing a build in white and making it slim.


I Will be using a Master Case Maker 5 and a Cosmos SE


WvRnxrr.jpg

6DSh5Gj.jpg

De-construccion have begun, lots of cutting still to go to get that "SLIM" look and the MIG waiting to put it all back together again.


Y1w9FHa.jpg






Quick layout of parts from both cases.

SP6Vhze.jpg





And a way to put it all back together again, Oh what fun this will be!

Some steel may be injured in this process :thumb:

9tqsi8f.jpg


So Far what i'm doing is im trying to reuse as many parts as I can from both cases. The MoBo tray has been centered in the case to have even room on both sides,

The back side being for the cooling and cabling, Giving me 80mm at the back and 80mm on the MoBo side and a 160mm all up. More then enough space to get things done.



km21eRJ.jpg


zr50LUU.jpg


F77DkW0.jpg


DPUJery.jpg


Wz5niyB.jpg


UyXTaAT.jpg


GboVhT3.jpg

Thanks again for stopping by.



#2 ZenModz

ZenModz

    Apprentice

  • Quark
  • 113 posts

Posted 20 March 2017 - 07:42 AM

Update on the Thinner build, Case frame is now reshaped. The back of the case now has room for 2x360 rads for the cooling the GPU & CPU. And in side the MaterWatt Maker 1200 PSU. Still lots more to come and still lots more to do. 1f642.png


7gChfCk.jpg

ZPOkDVS.jpg

8u9pqVT.jpg



#3 ZenModz

ZenModz

    Apprentice

  • Quark
  • 113 posts

Posted 20 March 2017 - 09:38 AM

Some of the very COOL hardware going into the Thinner case.


MAXIMUS VIII HERO ALPHA  MoBo W/block, From Bitspower.

vXZ5ZgH.jpg



ASUS STRIX 980ti And Bitspower RBG W/Block.
bZXpgbd.jpg


OszP2Lt.jpg



#4 Cybes

Cybes

    Titan

  • Atomican
  • 17,617 posts
  • Location:Where I am

Posted 20 March 2017 - 10:13 AM

Looking great so far!

I would not even have considered going thinner - boxes are hard enough to get my hands in anyway, and then there's the heat issue. Looks like you have that covered, though.

"Reality does not care what you think." - Dr Richard Feynman
"Ideas do not deserve respect.- people do." - Peter Boghossian (paraphrase)


#5 ZenModz

ZenModz

    Apprentice

  • Quark
  • 113 posts

Posted Yesterday, 08:52 PM

Cheers, Cybes. :)

 

Time again to show some pic's.

From one case to the next I have used the rear GPU mount from the Cosmos SE cut it out reshaped it to fit in the top of the frame to hold the GPU in place. Plus one new clear and black printed GPU logo, For some back light RBG.

9iJCMq6.jpg

9pprgBp.jpg

Z9JM8D1.jpg

0eLgbL7.jpg

W58ti6z.jpg


Edited by ZenModz, Yesterday, 08:56 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users