Jump to content


Photo

paste: always better than air?


  • Please log in to reply
22 replies to this topic

#21 stadl

stadl

    Guru

  • Super Hero
  • 9,047 posts

Posted 29 September 2017 - 01:08 PM

How about folding some metal flyscreen?

Unsure how well that would work - In close proximity lots of holes work together to be less effective, but I expect it would still be better than nothing.

 

 

 

 

 

EDIT: and would I be best to connect said flyscreen to the antenna GROUND, to act as a faraday cage for the chip?

 

Points where the current shield is soldered/attached to the board should be grounded - likely there is a ground plane in the PCB that is forming the other side of any shield.


A device so simple that it took a mind as brilliant as mine to create it! So brilliant, in fact, that simply by harnessing the power of one live frog, it... it... uhh... <poke> <poke> ... World domination has encountered a momentary setback. Talk amongst yourselves.


#22 Dasa

Dasa

    Guru

  • Super Hero
  • 14,871 posts

Posted 29 September 2017 - 08:19 PM

whatever you do stick a temp probe on the back of the pcb for some b4 and after temps


Silverstone TJ08-EW 6700k@4.7 1.375v - Z170-GENE - 2x8g 3866 16-16-16 - 1070@ 2100\9600MHz  -Samsung 830 64G, Sandisk Ultra II 960G, WD Green 3tb - Seasonic XP1050 - Dell U2713 - Pioneer Todoroki 5.1 Apogee Drive II - EK VGA-HF Supreme  - Phobia 200mm Rad - Silverstone AP181 Project Darkling
3770k vs 6700k RAM Scaling, HT vs RAM, Arma III CPU vs RAM, Thief CPU vs RAM
Parts Guide


#23 @~thehung

@~thehung

    Guru

  • Hero
  • 8,650 posts

Posted 05 October 2017 - 03:20 PM

speaking of flyscreen, i wonder if you could just replace the whole shield with something like this:
 
copper100.0012.jpg
 
RFI Shielding Mesh

Edited by @~thehung, 05 October 2017 - 03:20 PM.

no pung intended




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users