Atomic 3DMark & Game Benchmark Rankings, "Wasting electricity since 2001" Options

[NukeJockey]

Good luck breaking 12k :P

Scarlett heathens.(looks more like red to me!)

[Bolter01]

Good luck breaking 12k :P

Scarlett heathens.(looks more like red to me!)

Nor am I required to Nuke, only to best you in Dual GPU combat tis more than enough a welcome challenge to keep me amused

[supam]

3dmark 11 - Dual ATI
P10044 supam - i7 2600k@4.8GHz(w) - HD6970@960/1525(w) - http://3dmark.com/3dm11/988490

Posting as it's my first score over 10k there is more legs in the setup but I'm still coming to terms with everything.

Stock volts on the 6970 as I get artifacts with even the smallest volt increase in afterburner.

[Bolter01]

Brilliant supam more ATI goodness!

P10106 Bolter01 - 2600K@4.2Ghz (w) - HD6990@902/1272 (w) LINK

Maybe its not a matter of luck after all...

This post has been edited by Bolter01: Apr 9 2011, 12:50 AM

[supam]

Improvement now that ram is sorted out somewhat.

3dmark 11 - Dual ATI
P11053 supam - i7 2600k@4.6GHz(w) - HD6970@1000/1525/1.225v(w) - http://3dmark.com/3dm11/990326

Interesting that the artifacts from overvolting are only in 2d mode.

[NukeJockey]

Good luck breaking 12k :P

Scarlett heathens.(looks more like red to me!)

Nor am I required to Nuke, only to best you in Dual GPU combat tis more than enough a welcome challenge to keep me amused

Challenge? :P I'm not even trying to get a high score lol, my cards don't clock very well.

[3dmark master]

All updated!

Note:
Philo, your heaven run has no AA, it needs to be 4x


Bolter> holy shit awesome

[supam]

The best I can do without risking smoke.

3dmark 11 - Dual ATI
P11223 supam - i7 2600k@5GHz(w) - HD6970@1010/1530(w) - http://3dmark.com/3dm11/995893

3DMARK Vantage - Dual GPU
P39188 supam - i7 2600k@5GHz(w) - HD6970@1010/1530(w) - http://3dmark.com/3dmv/3067491

Unigine Heaven 2.5 - Dual GPU
1823 supam - i7 2600k@5GHz(w) - HD6970@1010/1530(w) - http://img.photobucket.com/albums/v518/supam/Heaven1823.jpg

[Bolter01]

Raising the the bar for me all the time eh supam?

GR8 work! Excellent scores for ATI
I can see I'll need to do a lot of fine tuning

This post has been edited by Bolter01: Apr 10 2011, 05:23 PM

[supam]

Raising the the bar for me all the time eh supam?

GR8 work! Excellent scores for ATI
I can see I'll need to do a lot of fine tuning

I was getting tearing in 11 and heaven at that speed. I tried higher but was getting some scary artifacting, whole screen breaking into primary colours sort of thing. Cards dont want more voltage either so I'm pretty much maxed unless i look at the bios again, but I've already wasted 2 evenings trying to sort through the bios. Happy with the speeds so I've dialed them back and actually installed some games. ;)

[Bolter01]

Got any pic's of your RIG? I'd like to see your "loop'n'blocks"

[Dasa]

found my crysis disk
73.549 Dasa i7 2600K@4.48GHz(w) - SLI GTX480@900/2050(w)

heaven
2102 Dasa - i7 2600K@4.48GHz(w) - SLI GTX480@925/21113(w)

This post has been edited by Dasa: Apr 11 2011, 05:51 PM

[smakme7757]

found my crysis disk
73.549 Dasa i7 2600K@4.48GHz(w) - SLI GTX480@900/2050(w)

heaven
2102 Dasa - i7 2600K@4.48GHz(w) - SLI GTX480@925/21113(w)

Damn nice FPS in Crysis mate top job! Nice heaven score as well!

[philo-sofa]

@ Bolter - cry havoc and let slip the red dogs of war!

All updated!

Note:
Philo, your heaven run has no AA, it needs to be 4x

On a related note, oops sorry and lol. Will have to find some time to re-bench it seems...

[Dasa]

found my crysis disk
73.549 Dasa i7 2600K@4.48GHz(w) - SLI GTX480@900/2050(w)

heaven
2102 Dasa - i7 2600K@4.48GHz(w) - SLI GTX480@925/21113(w)

Damn nice FPS in Crysis mate top job! Nice heaven score as well!

ta
im hoping to get near 80fps in crysis soon
its nice to see this thread progressing so well

[smakme7757]

found my crysis disk
73.549 Dasa i7 2600K@4.48GHz(w) - SLI GTX480@900/2050(w)

heaven
2102 Dasa - i7 2600K@4.48GHz(w) - SLI GTX480@925/21113(w)

Damn nice FPS in Crysis mate top job! Nice heaven score as well!

ta
im hoping to get near 80fps in crysis soon
its nice to see this thread progressing so well

It's progressing very well. I've sent my motherboard back and i'm awaiting the B3 in return so i can't do much until then.

[Dasa]

It's progressing very well. I've sent my motherboard back and i'm awaiting the B3 in return so i can't do much until then.

ah nice i need to do the same someday
who knows maybe they will make another minor revision i may just keep this twitchy bugger a while longer and maybe i will find a point where i could live without it for a week or so :)

[supam]

Got any pic's of your RIG? I'd like to see your "loop'n'blocks"

http://forums.atomicmpc.com.au/index.php?s...st&p=832307

best i can do, working bush today.

Blocks are all EK blocks, rad is a xspc 480, and i've got the integrated xspc laing pump dual bay res. I like the idea of the pump/res combo but due to the design it took like 2 days to bleed the lines.



My UD7 is also a pain. Doesn't like cold boots despite being turned well back from what is prime stable.

[smakme7757]

My UD7 is also a pain. Doesn't like cold boots despite being turned well back from what is prime stable.

What BIOS are you using?

F7 was the most stable for me and i never got any issues after setting my overclock. F8 has also been released which might even improve on F7...Neither support PLL overvoltage though if you need that.

[supam]

My UD7 is also a pain. Doesn't like cold boots despite being turned well back from what is prime stable.

What BIOS are you using?

F7 was the most stable for me and i never got any issues after setting my overclock. F8 has also been released which might even improve on F7...Neither support PLL overvoltage though if you need that.

it's a b3 board, different bios. F2 bios, I tried the F3 beta bios but it was worse. Just checked and an offical F3 has been release, I might give it a go.

The description of the F3 bios is "Solve press reset button cause system abnormal" so if my Engrish deciphering is right it might address my problem ;)

This post has been edited by supam: Apr 12 2011, 09:54 PM