Jump to content
Sign in to follow this  
ZenModz

DOOM - Cooler Master world series Case mod.

Recommended Posts

0WQbQR3.jpg


Hello again.


The build based on the new DOOM game.

The Build will be entered in the Cooler Master world series Case mod.

Intro:

With this build I'm not going to try and better or match any other past doom builds,

I'm just going to give my own style of the new Doom game how I see it and the only way I know how, And that is to mod the crap out of it. I hope you enjoy the ride. This build only has a 8 week life span as it must be done before the last day for entering the Cooler master world series. So I have a real lot of work to do to get it done in time.

Before we get started I would like to thank all my new sponsors for believing in me, And for all your support you have given for this new build,. It means a lot to me.

To start off here is some of the coolest gear from Cooler Master.
Pun intended. :D




15buNbq.jpg





The Master Pro 5 case that will be used in this build, as well as the CM 850 PSU,
CM Silencio FP 120 PWM fans, And to top it off I will be painting a CM STORM MECH Keyboard to match the Master Pro 5 case.

I will go into more detail for each item as the build moves along.

To start of some photo, of the the work I have done so far over the last week.

MR creepy well that what I call him. and for some strange reason no one I know like the look of him. not sure why.


He started of as two blocks of sign foam and glued together with a thin layer of body filler. and a rough drawing of where I think things go.

 

 

The entire build will be done all by hand or hand tools. no 3d printing or any cnc used.


gQ0FzAs.jpg


Next the dremel come out to play. and some 120 grit sand paper.

gyHYGDj.jpg


zxU7BwL.jpg


b0GKb6l.jpg

F01fJli.jpg

ezUK9DR.jpg

jky2urt.jpg

So far so good. ?


Next is the Clay. Oh god now what, I'm thinking to my self! where to start ? Let me just say this is the first time I have tried doing some thing like this so it took some thinking before adding the clay.

I used ping pong balls for the eyes as they looked close to the eyes so thats what i used.

ja70xvH.jpg

tiOaR30.jpg

I have also started adding the space for the teeth which after doing all the top ones, i found that they where all to wide so later one I re-did them.

J48SD9V.jpg


Started adding some pins for the teeth. as well as the center bones for the eye brows

BwyWFQL.jpg



And here the inside of the bottom jaw.

Now the holes for the teeth on the bottom jaw.



pkAKsCA.jpg



Here I have cut the bottom jaw out to make it easier to work on.

7x1VJ8F.jpg




More pins, And look his first tooth how cute.

5xbzAPg.jpg

That soon changed. :Paranoid:

uJZXx6r.jpg


And then there where more.

EQqVDSv.jpg


hbZPVLX.jpg

Remember what I was saying about the top teeth holes fix now.

VzsV5I7.jpg

CHuoVY2.jpg

VUkLuoG.jpg

gbYw0bc.jpg

Nwhw45q.jpg

6ENKXBx.jpg

9CFDqj9.jpg

i2Gw2b7.jpg



starting to add more detail now. and have fitted the bottom teeth back.

pFgAtli.jpg




Edited by ZenModz
  • Like 1

Share this post


Link to post
Share on other sites

Where's the skull going to go? Part of the overall case or something?

 

Doesn't have much of a forehead - but being Doom I suppose you can pass it off as alien, zombie, or neanderthal.

Share this post


Link to post
Share on other sites

Here I'm adding the gums hanging off. Should look good when painted.

UONxawA.jpg

l8Xh9Yd.jpg

8Q64ijh.jpg

Ptahq4u.jpg

3XbmKBu.jpg


Case Striped and off to be painted.

vKQAJr5.jpg

q9JqPAE.jpg

6RoKFMf.jpg

tSxvbjk.jpg

BPeeJC1.jpg

VpMKj48.jpg

64iv1dE.jpg




And back into shape.

Wd7b6zs.jpg

IbBdgqo.jpg

That all for now more again real soon.


Thanks for stopping by.

  • Like 2

Share this post


Link to post
Share on other sites

Where's the skull going to go? Part of the overall case or something?

 

Doesn't have much of a forehead - but being Doom I suppose you can pass it off as alien, zombie, or neanderthal.

 

Hi Rybags Thanks for your feed back. :) for where the skulls is going I'm not giving out to much info just yet :P But you will get to see where its going as the build progress. The forehead is very much the same as the photo reference from the game, but it is the first time for me doing a skull so it may be a little out.

Edited by ZenModz

Share this post


Link to post
Share on other sites

This Doom UCA logo :)

 

WnWE5KX.gif


Some mesh for the hand that I'm going to start making.

zIVVtL7.jpg




Starting to cover the mesh and added the wire for the fingers.

RZl6VtT.jpg




Added the bends for the fingers.

ZBAO2Ag.jpg

qcHGfoo.jpg




More on that later on for now back to the skull.

I added a drip what should look like blood dripping once painted.

BjWSEIZ.jpg

iM3DAIT.jpg




What I have done next is sprayed the skull in some high-fill 2K primmer when dry I will sand with 600 grit paper. and then I will paint the skull Bone white.

bWBWwwn.jpg

OGt1v0B.jpg

H6fREnY.jpg

eEZyaNG.jpg





Now dry enough for sanding.

s5ooK6I.jpg

 

ltp8WDy.jpg

Thanks again for stopping by.

More again soon.

Edited by ZenModz
  • Like 1

Share this post


Link to post
Share on other sites

Are the sutures (join lines) below the eye sockets deliberate?

 

I think a big part of authenticity is having those lines in the scalp part of the skull.

Share this post


Link to post
Share on other sites

Hi Titan.

 

Yes I put the cracks in the skull there will be more but most wont be see from the Blood ill be adding to the top of the skull. If they are in the right spot I not sure. I just added some for the fun of it.

Share this post


Link to post
Share on other sites

If I only know how much fun this was before. I would have been doing this years ago. Hope you all like it so far.


voqmzHG.jpg


Thanks for stopping by!

Share this post


Link to post
Share on other sites

Thank you Director. :)

 

 

 


Got some of the painting done today mostly the skin and nails on the hand.
and will do the rest in the morning.

ePzswM7.jpg


Thanks again for stopping by.

  • Like 2

Share this post


Link to post
Share on other sites

Don't look if your skittish around blood.

 

pMjmO45.jpg

QeuGYlA.jpg

6DQ2Zxy.jpg

1ZcHXlV.jpg


That's all for now,



Thanks for stopping by.

Edited by ZenModz

Share this post


Link to post
Share on other sites

Hello again.


Not giving to much away on the case ATM. But it is well under way.

VqBu2pi.jpg

if anyone wants to know how the can it still be opened I'm making it so all the panels can still be removed.

JAo23n7.jpg


To start the ball rolling here is the Mobo process.

The Mother Board going into the Doom build is the ASUS Sabertooth X99 2011-3

The link can be found here : https://www.asus.com/au/Motherboards/SABERTOOTH_X99/

I think a very cool looking Mobo to start with for the Doom case. and should work well with the theme with it's armor plate cover.

YozNCwp.jpg


What I like most about this Mobo is all the extra bits that come with it like the PCI-e covers and a plug for every thing plus a fan that can be add to the Mobo for some better cooling that I'm going to be using.

1Mv90pB.jpg


Plus you get 4 ram bank fillers to hide the empty ram slots. as well as 3 thermal sensors that plug into the Mobo.

So to start off I have removed the Armor to get it ready for it to be painted in silver.

2Ir89r0.jpg


Ok here come all the PC goodness so I wont do much more talking as I know most of you will just look at the pretty photo's


All Silver. :)

pdgqoMl.jpg

LJcVrmP.jpg




Adding a small amount of yellow. more yellow will be added to the inside of the case later.

9FMC8EB.jpg







Here I also repainted the text onto the hole mobo. to make it all stand out.

wS1c3OR.jpg



For the next photo's I have done a small amount of weathering on the Mobo.



ecNahDy.jpg

7FcWa89.jpg

hnI7rG2.jpg

EZRM8vT.jpg






Thanks to Cooler Master and AVEXIR I get to use some sweet looking BLITZ Series AVEXIR Ram. You just have to love how good there ram looks.:D

NE14cYv.jpg


But I'm still going to mod it just a bit. to work in with the look of the Mobo.

Black.

ekXMjYe.jpg

Now silver.

7WjLQ00.jpg


And now even sexier then before.

SldCxKr.jpg

hAQU7fA.jpg

k2Qtn8K.jpg

AuAo8ee.jpg


Here is the Mobo completed :P


vzUA4Kc.jpg

qbbc0wm.jpg

7UxdNRz.jpg

vUUECwo.jpg

WnMGYrL.jpg

WkNflOM.jpg


That it for now, As always thanks for stopping by.

Share this post


Link to post
Share on other sites

Hello again.



First off for this week Cooler Master sent me some A cool t-shirt and a drink container for being part the the Cooler Master World Series. Thank you CM I will wear it with pride, :thumbup:

KcTNG4v.jpg






Sadly Ive been told I look bad in photos. What do you think ? I was Home Alone at the time. and was a bit scared when the flash went off :D


M5IO3aM.jpg


So the build is still moving along, I started off making a airlock door. and some rails for the inside and some other parts, then moved on to the case again.


O06oqDv.jpg

xRo7ike.jpg



The Rails relay suck to make. just my 2 sense worth. And yes I need to make more! :upset:

ZypcbF6.jpg

All of this build is hand made, cut out mostly with a sharp blade and other hand tools.

d5Ft7rQ.jpg

TMApLD4.jpg

Ikl1ZNO.jpg





Still adding to the look of the case as I go. Below is where I'm up to so far.

51aszJd.jpg

ZihK0tZ.jpg

96Att8K.jpg


Some parts are being shaped with sign foam to make it a bit quicker.

KdpZQwu.jpg

gLAw1Q5.jpg

NUaWgGc.jpg

jEmwn40.jpg

That's about it for now. I'm waiting for the water cooling gear from Bitspower to arrive then I can start getting the inside up and going as well. :D

But for now I'm trying to get the outside all done, Not all that much more to go on the outside. just lots of small bits.


Again thanks for stopping by.

Edited by ZenModz
  • Like 1

Share this post


Link to post
Share on other sites

Cool... it looks a bit like a prop from a '70s BBC Sci-Fi but I'm sure it'll look the part once it's finished.


Wow... at last we get the page break that was needed about 8 posts ago.

Share this post


Link to post
Share on other sites

Cool... it looks a bit like a prop from a '70s BBC Sci-Fi but I'm sure it'll look the part once it's finished.

Wow... at last we get the page break that was needed about 8 posts ago.

Cheers Rybags, Yes there is a lot to look at before the next page. :)

Share this post


Link to post
Share on other sites

Hello again.

Here are some more photos again hope you like them. :)

d0peCha.jpg

biBrDUD.jpg


elevator door.

Rz0chqN.jpg

DmIJWtx.jpg

elevator power box. and will light up.

9kYAz53.jpg

More elevator parts. this is the top cover.
Pl34KQI.jpg

Xz73MJ0.jpg

PTjZiSD.jpg

esHayod.jpg

And for the rest. Hope you like them :)

lyRvjFS.jpg

CRJMqF5.jpg

0voKhkB.jpg

FgP6xOY.jpg

rcnChKQ.jpg

wNVpN0q.jpg

jWslywl.jpg

wXzRejH.jpg

95oI0e6.jpg

YVaNWim.jpg


Still looking to add a vent here.
Y2TcO2o.jpg

fVAyI2t.jpg

IimbV68.jpg

Hos1O0n.jpg

tmX3WCG.jpg

pUQ6h1Q.jpg

Still lots more to do. and more to add to it as well, I hope you all like how it's coming together let me know what you think all feed back is welcome :)

Thanks again for stopping by. :)

  • Like 2

Share this post


Link to post
Share on other sites

That petina/distressed look seems to have turned out real well.

What method is used? Just sponging on paint?

Share this post


Link to post
Share on other sites

Cheers Rybags. Hair spray, sponge, paintbrush, and airbrush, oil and acrylic paints where used. :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×